Service and Repair for Front Steering Knuckle on Navigator 4WD V8-54L DOHC VIN R
4. Safely reposition the anti-lock sensor wire.
1
Remove the bolt.
2
Safely reposition the anti-lock sensor wire.
5. Remove the tie rod end castle nut.
1
Remove and discard the cotter pin.
2
Remove the tie rod end castle nut.
6. Using the Pitman Arm Puller, separate the tie rod end.
^
Separate the tie rod end from the front wheel knuckle.
7. Remove the front shock absorber lower bolt and nut from the front suspension lower arm.