Navigator 4WD V8-5.4L DOHC VIN R (2001)
8. Remove the upper ball joint castle nut.
1
Remove and discard the cotter pin.
2
Remove the upper ball joint castle nut.
9. Using the Pitman Arm Puller to separate the front wheel knuckle from the front suspension upper arm.
10. Remove the lower ball joint castle nut.
1
Remove and discard the cotter pin.
2
Remove the lower ball joint castle nut.
11. Using the Pitman Arm Puller to separate the front suspension lower arm from the front wheel knuckle.
12. CAUTION: Do not allow the front wheel driveshaft and joint to hang unsupported. Suspend the front wheel driveshaft and joint with wire.
Remove the front wheel knuckle.
