Navigator 4WD V8-5.4L DOHC VIN R (2001)
4. Install the tie rod end castle nut.
1
Position the tie rod end.
2
Install the tie rod end castle nut.
3
Install a new cotter pin.
5. Position the anti-lock sensor wire.
^
Install the front brake anti-lock sensor wire bracket bolt.
6. Load the torsion bar.
1
Install the torsion bar adjuster.
-
Turn the torsion bar adjuster until the reference marks align.
2
Install the Torsion Bar Tool with the Torsion Bar Tool Adapters in the B slots on the Torsion Bar Tool.
3
Tighten the Torsion Bar Tool to load the torsion bar.
4
Install the torsion bar adjuster nut.
5
Install the torsion bar adjuster bolt.
6
Remove the Torsion Bar Tool.
7. Install the wheel hub.
8. Adjust the ride height.