lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Air Suspension - Repeat Compressor Drier Failures|Page 8456 > < Air Suspension - Repeat Compressor Drier Failures|Page 8454
Page 1
background image

Compressor/Pump: Service and Repair

REMOVAL 

1. Deflate the air suspension system.

2. Disconnect the battery ground cable.
3. Remove the windshield washer pump and reservoir.

4. Disconnect the air lines from the air compressor.

(1) Depress the red plastic retaining rings and hold firmly while pulling out on the air lines.
(2) Disconnect the air lines.

5. Disconnect the air compressor electrical connector.

6. Remove the air compressor bracket bolts and remove the air compressor and drier assembly.

Air Suspension - Repeat Compressor Drier Failures|Page 8456 > < Air Suspension - Repeat Compressor Drier Failures|Page 8454