Navigator 4WD V8-5.4L SOHC VIN L (1998)
Level Control Solenoid Valve: Service and Repair
Inflator Solenoid, Level Control
REMOVAL
1. Deflate the air suspension system. See: Service and Repair/Procedures/Inflating and Deflating the Air Suspension System
2. Disconnect the battery ground cable.
3. Raise and support the vehicle.
4. Disconnect the electrical connector.
NOTE: Front fill solenoid shown, front gate solenoid and rear fill solenoid similar.
5. Push in the red rings and disconnect the air lines.
6. Remove the solenoid from the frame.
