Navigator 4WD V8-5.4L SOHC VIN L (1998)
41. NOTE: Push the differential case down to fully seat the differential bearing cups in the front axle housing. Position the differential case assembly.
1
Position the differential bearing cups on the differential bearings.
2
Lower the differential case assembly in place between the differential bearing shims.
42. Install the bearing caps in their original positions and tighten with the housing still spread.
1
Position the bearing caps.
2
Install the bolts.
43. Remove the Differential Housing Spreader and reposition the Dial Indicator Bracketry.
44. NOTE: Measure the ring gear backlash at four places to obtain consistent reading.
Measure the ring gear backlash.
