Navigator 4WD V8-5.4L SOHC VIN L (1998)
1
Mount the dial indicator on the indicator base.
2
Position the indicator needle and zero the indicator.
3
Turn the ring gear without turning the pinion gear and record the measurement.
-
Refer to the specification chart.
NOTE: If backlash is not within specification, correct by increasing the thickness of one differential bearing shim and decreasing the thickness on
the other differential bearing shim by the same amount.
45. To increase the backlash, install the thicker differential bearing shim and the thinner differential bearing shim as shown.
46. To decrease backlash, install the thicker differential bearing shim and the thinner differential bearing shim as shown.
47. Lubricate and install the shift lever O-ring.
-
Use Ford Silicone Brake Caliper Grease and Dielectric Compound D7AZ-l9A331-A or WA-10 or equivalent meeting Ford specification
ESE-MlC171-A.
