Navigator 4WD V8-5.4L VIN 5 (2006)
Parking Brake Cable: Service and Repair
Parking Brake Cable - Rear
Parking Brake Cable - RH Rear
Removal and Installation
1. NOTE: Verify that the parking brake control is fully released.
NOTE: This step will require the aid of an assistant.
Relieve the tension on the parking brake cable system.
^
Pull down on the front parking brake cable at the connector clip.
^
Insert a 4 mm (5/32 inch) pin into the parking brake lever lockout hole.
2. WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking or towing an air suspension