Town Car V8-4.6L (2008)
29. NOTICE: Care must be taken to prevent damage to the passenger air bag module electrical connectors and locking inserts.
Using suitable tools (small screwdrivers, etc.), carefully depress the 2 locking tabs on the side of the passenger air bag module jumper harness
electrical connector and disconnect the electrical connector.
-
Repeat to disconnect the remaining passenger air bag module jumper harness electrical connector, detach the pin-type retainer and remove the
passenger air bag module jumper harness from the passenger air bag module.
30. NOTICE: Carefully align the locking inserts to the electrical connectors or damage may result.
Attach the 2 restraint system diagnostic tools (one shown) to the 2 passenger air bag module jumper harness electrical connectors and align and
install the locking inserts to electrical connectors.