Town Car V8-4.6L VIN V Flex Fuel (2006)
alignment. Repeat the necessary steps until the index marks align.
20. If equipped with memory seats, install the nuts and connect the memory seat components.
1
Route the wire harness, position the bracket with memory seat module onto the studs and install the 2 nuts and bolt.
2
Attach the seat motor electrical connector and wire harness stress relief retainer to the clips.
-
Connect the seat motor electrical connector.
3
Connect the 3 memory seat position sensors as noted during removal.
21. Install the seat track.
22. Install the seat.
23. Repower the supplemental restraint system (SRS).
24. If equipped with memory seats, cycle the driver seat in its full range of travel in all directions.