Town Car V8-4.6L VIN V Flex Fuel (2006)
4. Remove the RH temperature blend door actuator.
1
Remove the 3 temperature blend door actuator screws.
2
Disconnect the temperature blend door actuator electrical connector.
3
Remove the RH temperature blend door actuator.
5. To install, reverse the removal procedure.
LH
TEMPERATURE BLEND DOOR ACTUATOR - LH
Removal and Installation
1. Remove the LH lower instrument panel insulator.
2. Remove the lighting control module.
1
Detach the vacuum line.
2
Remove the screws.
3
Disconnect the lighting control module electrical connectors and remove the lighting control module.
3. Remove the LH temperature blend door actuator.
1
Disconnect the temperature blend door actuator electrical connector.
2
Remove the 3 temperature blend door actuator screws.
3
Remove the LH temperature blend door actuator.
4. To install, reverse the removal procedure.