Town Car V8-4.6L VIN V Flex Fuel (2006)
9. Remove the 2 cooling module bracket bolts.
-
To install, tighten to 10 Nm (89 lb-in).
10. Remove the 2 cooling module brackets.
11. Remove the condenser bolt.
12. Detach the power steering cooler from the cooling module clips.
13. Tilt the cooling module back and remove the condenser core.
14. To install, reverse the removal procedure.
-
Install new O-ring seals and gasket seals.
-
Lubricate the refrigerant system with the correct amount of clean PAG oil.
15. Evacuate, leak test and charge the refrigerant system.
16. Fill the transmission fluid to the correct level.