Town Car V8-4.6L VIN V Flex Fuel (2006)
4. If the evaporator core orifice is intact, engage the special tool. Hold the T-handle stationary while rotating the tool body to remove the evaporator
core orifice.
5. If the evaporator core orifice is broken, screw the end of the special tool into the broken orifice. Hold the T-handle stationary while rotating the
tool body to remove the evaporator core orifice.
Installation
1. Lubricate the evaporator core orifice O-ring seals with clean PAG oil and install the evaporator core orifice using the special tool.
2. Install new O-ring seals and connect the evaporator inlet fitting.
3. Evacuate, leak test and charge the refrigerant system.