Town Car V8-4.6L VIN V Flex Fuel (2006)
19. Loosen the 2 junction box bolts and position the junction box aside.
20. Remove the bolt.
21. Remove the RH front wheel and tire.
22. Remove the screws and the RH fender apron.
-
Detach the wiring harness pin-type retainers.
23. Remove the nut and position the wire harness aside.
24. Remove the 3 lower evaporator core housing nuts.
25. Remove the 3 upper evaporator core housing nuts.
26. Remove the evaporator core housing.
27. To install, reverse the removal procedure.
-
Clean and lubricate the coolant hoses with plain water only if needed.
-
Install new O-ring seals lubricated in clean PAG oil.
