Town Car V8-4.6L VIN V Flex Fuel (2006)
17. Remove the bolts and remove the parking brake cable bracket and position aside.
18. NOTE: The crossmember is a press fit in the crossmember pocket, it may be necessary to pry the crossmember out of the crossmember pocket.
Be careful not to damage the crossmember. Only the RH side of the crossmember will need to be lowered in order to gain access to the rear
extension housing.
Lower the RH side of the crossmember.
19. Remove the rear transmission insulator bolts.
20. Remove the LH and RH catalyst monitor connector retainers.