Town Car V8-4.6L VIN W (1997)
8. Press <* to advance to the next programming step and so on. Enter the information in all the programming steps. Edit the information as follows:
^
Pressing CLR while the contents of a programming step are displayed will change the contents to the previously stored value.
^
Pressing # while a programming step is being displayed (01, 02, etc.) will exit the programming mode without altering any information.
In Step 7 of the programming, the six-digit security code is used to access certain call restriction and advanced security functions. (For example,
you may use this code, in conjunction with selecting a service level, to limit other users of your cellular telephone to local or incoming calls).
Select any six-digit code that you will remember, but one that will not be compromised easily. (You may wish to spell out a six-letter word on the
keypad, or use the last six digits of your Social Security number, etc.) Consult your Mobile Phone User's Manual for further information.
NOTE:
^
To program the phone with a second phone number, enter 1xx110 instead of 1XX100 during Step 10. Then press the <* button after Step 11 to
continue programming the second phone number.
^
The X's denote either is or Os in the following chart. This is a complete list of all the programming steps and contents:
9. After all information has been entered, press <* to go through all the entries to verify that the information entered is correct. To store the
information, press <* so the display shows any entry number (i.e. 01, 02, etc.), then press SEND. The mobile telephone transceiver should power
down and power-up to indicate the programming is done.
NOTE: The three-digit unlock code is used to lock your mobile telephone to prevent unauthorized usage. With many models, this number can be
programmed as often as desired. Consult your Mobile Phone User's Manual, under the topic "Changing Your Unlock Code."
10. Verify that the information was stored by pressing RCL + #>. The phone number just programmed should be displayed.
^
Any subsequent programming attempts will require that you enter FCN + 0 + security code + security code + RCL in order to enter the
