3 L4-2.0L (2007)
-
When locking connectors, listen for a click indicating they are securely locked.
Inspection
-
When a tester is used to inspect for continuity or measuring voltage, insert the tester probe from the wiring harness side.
-
Inspect the terminals of waterproof connectors from the connector side since they cannot be accessed from the wiring harness side.
Caution: To prevent damage to the terminal, wrap a thin wire around the tester probe before Inserting into terminal.
Terminals
Inspection
-
Pull lightly on individual wires to verity that they are secured in the terminal.
