3 L4-2.0L (2007)
Replacement
-
Use the appropriate tools to remove a terminal as shown. When installing a terminal, be sure to insert it until it locks securely.
-
Insert a thin piece of metal from the terminal side of the connector and with the terminal locking tab pressed down, pull the terminal out from the
connector.
Sensors, Switches, And Relays
-
Handle sensors, switches, and relays carefully. Do not drop them or strike them against other objects.
Fuse
Replacement
-
When replacing a fuse, be sure to replace it with one of the same capacity. If a fuse fails again, the circuit probably has a short and the wiring
should be inspected.
-
Be sure the negative battery terminal is disconnected before replacing a main fuse.