3 L4-2.5L (2010)
Antenna Cable: Testing and Inspection
Antenna Feeder No.2 Inspection
ANTENNA FEEDER NO.2 INSPECTION
1. Disconnect the negative battery cable.
2. Remove the following parts:
a. A-pillar trim (RH) See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/A-Pillar Trim Removal/Installation
b. Rear seat cushion (4SD) See: Body and Frame/Seats/Seat Cushion/Service and Repair/Rear Seat Cushion Removal/Installation
c. Rear scuff plate (RH) See: Body and Frame/Interior Moulding / Trim/Scuff Plate/Service and Repair/Rear Scuff Plate Removal/Installation
d. Tire house trim (RH) See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Tire House Trim Removal/Installation
e. Trunk side upper trim (5HB, RH)
f.
Trunk side trim (5HB, RH)
g. C-pillar trim (RH) See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/C-Pillar Trim Removal/Installation
3. Disconnect the antenna feeder No.1.
4. Disconnect the antenna feeder No.3.
4SD
5HB