3 L4-2.5L (2010)
Antenna Cable: Testing and Inspection
Antenna Feeder No.1 Inspection
ANTENNA FEEDER NO.1 INSPECTION
1. Disconnect the negative battery cable.
2. Remove the following parts:
a. Center panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and
Replacement/Center Panel Removal/Installation
b. Audio unit See: Radio, Stereo, and Compact Disc/Service and Repair/Removal and Replacement/Audio Unit Removal/Installation
c. A-pillar trim (RH) See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/A-Pillar Trim Removal/Installation
3. Disconnect antenna feeder No.2.
4. Verify that the continuity between antenna feeder No.1 terminals is as indicated in the table.
-
If not as indicated in the table, replace antenna feeder No.1.
