3 L4-2.5L (2010)
Tightening torque
-
18-22 Nm {1.9-2.2 kgf-m, 14-16 ft-lbf}
Cylinder Head Cover Installation Note
1. Apply silicone sealant to the mating faces as shown.
CAUTION:
-
Install the cylinder head cover before the applied silicone sealant starts to harden.
Thickness
-
4.0-7.0 mm {0.16-0.27 in}
2. Install the cylinder head cover with a new gasket.
3. Tighten the bolts in the order shown.
Tightening torque
-
8.0-9.5 Nm {82-96 kgf-cm, 71-84 in-lbf}
4. Install the purge solenoid valve installation bracket.