3 L4-2.5L (2010)
Trunk / Liftgate Switch: Service and Repair
Liftgate Opener Switch Removal/Installation
LIFTGATE OPENER SWITCH REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts
a. Liftgate upper trim
b. Liftgate side trim
c. Liftgate lower trim
d. Liftgate latch and lock actuator See: Body and Frame/Locks/Power Locks/Power Door Lock Actuator/Service and Repair/Liftgate Latch And
Lock Actuator Removal/Installation
3. Disconnect the connector.
4. Pull out the retainer in the direction of the arrow.
5. Remove the liftgate opener switch.
6. Install in the reverse order of removal.
