3 L4-2.5L (2010)
Trunk / Liftgate Switch: Testing and Inspection
Liftgate Opener Switch Inspection
LIFTGATE OPENER SWITCH INSPECTION
1. Disconnect the negative battery cable.
2. Remove the following parts:
a. Liftgate upper trim
b. Liftgate side trim
c. Liftgate lower trim
d. Liftgate latch and lock actuator See: Body and Frame/Locks/Power Locks/Power Door Lock Actuator/Service and Repair/Liftgate Latch And
Lock Actuator Removal/Installation
e. Liftgate opener switch See: Service and Repair/Liftgate Opener Switch Removal/Installation
3. Verify the continuity of liftgate opener switch terminals A and B.
4. Verify that the continuity is as indicated in the table.
-
If not as indicated in the table, replace the liftgate opener switch.