3 L4-2.5L (2010)
Front Steering Knuckle: Overhaul
WHEEL HUB, STEERING KNUCKLE DISASSEMBLY/ASSEMBLY
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
Wheel Hub Component Removal Note
1. Remove the wheel hub component using the SSTs.
2. If the bearing inner race remains on the front wheel hub component, perform the following procedure:
Without using SST
1. Grind a section of the bearing inner race until approx. 0.5 mm {0.02 in} remains.