3 L4-2.5L (2010)
CAUTION:
-
If any old sealant gets into the transaxle during installation of the oil pan, trouble may occur in the transaxle case and oil pan, and clean with
cleaning fluids.
6. Install the oil pan before the applied sealant starts to harden.
Tightening torque
-
6-8 Nm {62-81 kgf-cm, 54-70 in-lbf}
7. Add ATF. See: Automatic Transmission/Transaxle/Service and Repair/Procedures
8. Install the aerodynamic under cover NO.2. See: Body and Frame/Splash Guard/Service and Repair/Aerodynamic Under Cover No.2
Removal/Installation
9. Connect the negative battery cable.
10. Install the battery cover. See: Starting and Charging/Battery/Service and Repair/Removal and Replacement
11. Perform the "Mechanical System Test". See: Transmission Control Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Mechanical System Test [FS5A-EL]