3 L4-2.5L (2010)
Clutch Pedal Position Sensor / Switch: Testing and Inspection
CLUTCH PEDAL POSITION (CPP) SWITCH INSPECTION [LF, L5]
1. Verify that the CPP switch is installed properly.
2. Remove the battery cover. See: Starting and Charging/Battery/Service and Repair/Removal and Replacement
3. Disconnect the negative battery cable.
4. Disconnect the CPP switch connector. See: Clutch/Clutch Pedal Assembly/Service and Repair
5. Inspect for continuity between the CPP switch terminals using an ohmmeter.
-
If not as specified, replace the CPP switch.
See: Clutch/Clutch Pedal Assembly/Service and Repair
Specification