3 L4-2.5L (2010)
Gear Sensor/Switch: Service and Repair
Neutral Switch Removal/Installation [A26M-R]
NEUTRAL SWITCH REMOVAL/INSTALLATION [A26M-R]
1. Disconnect the negative battery cable.
2. Disconnect the neutral switch connector.
3. Remove the aerodynamic under cover No.2. See: Body and Frame/Splash Guard/Service and Repair/Aerodynamic Under Cover No.2
Removal/Installation
4. Remove the neutral switch.
5. Install the neutral switch to the transaxle case.
Tightening torque
-
29-52 Nm {2.9-5.3 kgf-m, 21-38 ft-lbf}
6. Install the aerodynamic under cover No.2. See: Body and Frame/Splash Guard/Service and Repair/Aerodynamic Under Cover No.2
Removal/Installation
7. Connect the negative battery cable.
