5 L4-2.3L (2007)
Center Sliding Door Rail: Service and Repair
Center Guide Rail Cover Removal/Installation
CENTER GUIDE RAIL COVER REMOVAL/INSTALLATION
1. Remove the following parts:
1. Third-row seat
2. Rear scuff plate
3. Third-row seat belt lower anchor installation bolt
4. Trunk end trim
5. Trunk side trim
6. Rear combination light
2. Remove the nuts.
3. Pull the center guide rail cover away from the vehicle and remove clips A and B.
4. Remove the center guide rail cover.
5. Install in the reverse order of removal.
