5 L4-2.3L (2007)
Center Sliding Door Rail: Service and Repair
Center Guide Rail Removal/Installation
CENTER GUIDE RAIL REMOVAL/INSTALLATION
WARNING: If the sliding door removal is performed by one person, the sliding door could fall down and serious injury may occur. Always
perform the procedure with at least another person to prevent the sliding door from falling down.
1. Remove the following parts:
1. Rear package tray lid
2. Third-row seat
3. Rear scuff plate
4. Trunk end trim
5. Third-row seat belt lower anchor installation bolt
6. Cargo compartment light
7. Trunk side trim
8. Rear combination lights
9. Center guide rail cover
2. Disconnect the center roller from the sliding door.
3. Remove in the order indicated in the figure.
4. Install in the reverse order of removal.