5 L4-2.3L (2007)
9. When using a new liftgate, peel off the masking tape after the body color has been painted.
10. When using a new liftgate, apply primer as shown in the figure and allow it to dry for approx. 30 min.
CAUTION:
-
To prevent poor adhesion to the glass, apply primer and avoid the application area of the adhesive for the liftgate.
-
To prevent weakening of the primer adhesion, keep the bonding surface free of dirt, moisture, and grease. Do not touch the surface
with your hand.
11. Install fasteners and spacers to the body as shown in the figure.
