6 L4-2.5L (2010)
Rear Door Latch: Testing and Inspection
Rear Door Latch Switch Inspection
REAR DOOR LATCH SWITCH INSPECTION
1. Fully open the rear door glass.
2. Disconnect the negative battery cable.
3. Remove the following parts:
a. Rear door trim See: Rear Door Panel/Service and Repair/Removal and Replacement
b. Rear door speaker See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Speaker/Service and Repair/Rear Door
Speaker Removal/Installation
c. Rear door quarter glass See: Rear Door Window Glass/Service and Repair/Rear Door Quarter Glass Removal/Installation
d. Rear door glass See: Rear Door Window Glass/Service and Repair/Rear Door Glass Removal/Installation
e. Rear door module panel See: Service and Repair/Rear Door Module Panel Removal/Installation
f.
Rear door latch and lock actuator See: Service and Repair
4. Press the latch in using a flathead screwdriver to inspect the latch lever condition.
5. Verify that the continuity is as indicated in the table.
-
If not as indicated in the table, replace the rear door latch and lock actuator.
