6 L4-2.5L (2010)
Power Steering Line/Hose: Service and Repair
POWER STEERING FLUID LINE COMPONENT REMOVAL/INSTALLATION [L5]
NOTE:
-
The following procedure is for replacement of the parts shown in the figure.
Pressure Hose Removal/Installation
1. Remove the connecting bolt from the power steering oil pump.
2. Remove the aerodynamic under cover NO.2. See: Body and Frame/Splash Guard/Service and Repair/Aerodynamic Under Cover No.2
Removal/Installation
3. Set the front mudguard (RH) out of the way. See: Body and Frame/Spoilers, Flaps, and Air Dams/Mud Flap/Service and Repair
4. Remove the splash shield (RH).
5. Remove in the order indicated in the table.
