6 L4-2.5L (2010)
Wheel Fastener: Service and Repair
Front Wheel Hub Bolt Replacement
FRONT WHEEL HUB BOLT REPLACEMENT
1. Remove the brake caliper component and disc plate. See: Steering and Suspension/Steering/Front Steering Knuckle/Service and Repair/Removal
and Replacement
2. Remove the wheel hub bolt using the SST as shown in the figure.
NOTE:
-
When removing the wheel hub bolts, perform the work between range A shown in the figure to assure a space for the bolt removal.
3. Place a new wheel hub bolt in the wheel hub.
4. Install the wheel hub by placing a proper sized washer on the hub, and tightening the nut as shown in the figure.