6 V6-3.7L (2009)
1. Center the steering wheel and confirm that the vehicle wheels/tires are pointing straight.
2. Loosen the left and right tie-rod end locknuts and turn the tie-rods equally. Both tie rods are right threaded, so turning the right tie-rod toward the
front of the vehicle and the left toward the rear increases toe-in.
NOTE:
-
Turning both tie-rods one complete turn changes toe-in by about 6 mm {0.24 in} (0°36').
3. Tighten the tie-rod end locknuts to the specified torque.
Tightening torque
-
69-98 Nm {7.1-9.9 kgf-m, 51-72 ft-lbf}
4. Verify that the boot is not twisted, and install the boot clamp.
