626 LX L4-2.0L DOHC (1999)
14.
Install lower right mounting bolt using backing nut with L shaped bracket by inserting the nut through the slot to the right of the mounting hole
15.
Install upper right mounting bolt using one of the 6 mm flange nuts.
NOTE:
On 2000-01 model year vehicles, install the left side mounting tab to the center stay using a 25 mm bolt.
On 1998-99 model year vehicles, do not install the left side mounting bolt at this time. A longer 35 mm bolt will be installed with the bumper cover
in a later step.
16.
Proceed to Oil Pipe Bracket Installation procedure.
Oil Pipe Bracket Installation/Oil Pipe Assembly Installation
Oil Pipe Bracket Installation
1.
Remove lower left battery tray mounting bolt.
2.
Position oil pipe mounting bracket so that mounting hole lines up over battery tray mounting hole and single large stud fits through hole in body on
right side.
