929 V6-3.0L DOHC (1993)
7. Inspect the SST.
8. Connect the SST to the clock spring connector as shown in the figure.
(Passenger-side)
4. Remove the front and rear console assemblies passenger-side undercover, lower panel, a panel.
5. Slide the air bag module forward and disconnect bag module connector.
6. Pull the connector down through the underside opening and reinstall the air bag module.
7. Inspect the SST.
8. Connect the SST to the air bag module as shown figure.
9. Connect the red chip of the SST to the positive battery terminal and the black clip to the negative terminal.
10. Verify that the red light on the SST is illuminated.