mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Air Bag Control Module > < Driver Side|Page 4790
Page 6
background image

11.  Make sure all persons are standing at least 6m {20 ft} from the vehicle.
12.  Press the activation switch on the SST to deploy the bag.

Air Bag Disposal

Air Bag Disposal 

Warning

The air bag is very hot immediately after it deploys. You can be burned. Do not touch the air bag module for at least 15 minutes after
deployment.

Warning

Pouring water on a deployed air bag is dangerous. The water will mix with the residual gases to form a gas that can make breathing
difficult if inhaled. Do not pour water on the deployed air bag module.

Warning

A deployed air bag module may contain deposits of sodium hydroxide, a caustic by-product of the gas-generated combustion. If this
substance gets in your eyes or on your hands, it can cause irritation and itching. When handling a deployed air bag module, wear gloves
and safety glasses.

1.  Put on gloves and safety glasses.
2.  Place the deployed air bag module in a plastic bag, seal it, and then dispose of it.
3.  Wash your hands after removing your gloves.

Air Bag Control Module > < Driver Side|Page 4790