929 V6-3.0L DOHC (1993)
5. Align the alignment holes in the slider with the holes in the indicator panel.
6. Install a suitable heavy-gauge wire to hold the slider.
7. Tighten the indicator screws.
Tightening torque: 2.0 - 2.9 N.m (20 - 30 kgf.cm, 18 - 26 in.lbf)
8. Remove the wire.
9. Verify that the selector lever properly aligns with the indicator in each range.
Selector lever knob
1. Apply locking compound to the screws.
2. Tighten the screws.
Tightening torque: 2.0 - 2.9 N.m (20 - 30 kgf.cm, 18 - 26 in.lbf)