Transmission Housing Seal & Bushing Removal/Installation - 4X2 - Pg 2030
3. Install the transmission mount.
(1) Position the transmission mount on the extension housing.
(2) Install the transmission mount-to-extension housing screws.
4. Install the transmission mount into the crossmember and tighten the transmission mount nuts.
5. Install the rear propeller shaft.
6. Fill the transmission with clean automatic transmission fluid to the correct level and check for correct transmission operation. See AUTOMATIC
TRANSMISSION PRELIMINARY INSPECTION. See: Transmission Control Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Automatic Transmission Preliminary Inspection