mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

A/C - Boom Noise At 2,500 - 3,000 Rpm|Page 841 > < A/C - Booming Noise At 2,500 - 3,000 Rpm|Page 836
Page 1
background image

Hose/Line HVAC: Customer Interest
A/C - Boom Noise At 2,500 - 3,000 Rpm

Bulletin No. 004/98

Issued 10/22/98

Revised

Category
B (01)

Applicable Models
1998 B-2500

Subject
BOOM NOISE AT 2500-3000 RPM

APPLICABLE MODEL(S)/VINS
All 1998 B-2500 with A/C.

DESCRIPTION

A boom noise may be heard while driving at 2500 - 3000 RPM. This may be caused by the low side A/C hose going into resonance with the engine
vibration. A bracket is now available to hold the low side A/C hose stable during engine vibration.

Customers complaining of this concern should have their vehicle repaired according to the following procedure.

REPAIR PROCEDURE

1.

Verify customer complaint.

2.

Remove approximately 2" of insulation from the low pressure A/C hose next to the front upper compressor bolt as shown.

3.

Tape both ends of the cut insulation with suitable tape to prevent the insulation from peeling back.

A/C - Boom Noise At 2,500 - 3,000 Rpm|Page 841 > < A/C - Booming Noise At 2,500 - 3,000 Rpm|Page 836