mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

A/C - Booming Noise At 2,500 - 3,000 Rpm|Page 836 > < Heater Hose|Service and Repair
Page 1
background image

Hose/Line HVAC: Customer Interest
A/C - Booming Noise At 2,500 - 3,000 Rpm

Bulletin No. 004/98

Issued 10/22/98

Revised

Category
B (01)

Applicable Model/s
1998 B-2500

Subject
BOOM NOISE AT 2500-3000 RPM

APPLICABLE MODEL(S)/VINS
All 1998 B-2500 with A/C

DESCRIPTION

A boom noise may be heard while driving at 2500 - 3000 RPM. This may be caused by the low side A/C hose going into resonance with the engine
vibration. A bracket is now available to hold the low side A/C hose stable during engine vibration.

Customers complaining of this concern should have their vehicle repaired according to the following procedure.

REPAIR PROCEDURE

1.

Verify customer complaint.

2.

Remove approximately 2 of insulation from the low pressure A/C hose next to the front upper compressor bolt as shown.

3.

Tape both ends of the cut insulation with suitable tape to prevent the insulation from peeling back.

A/C - Booming Noise At 2,500 - 3,000 Rpm|Page 836 > < Heater Hose|Service and Repair