B3000 4WD V6-3.0L OHV (1995)
NOTE:
Align shafts with original alignment marks.
9.
Tighten eight (8) rear driveshaft retaining bolts. Refer to the workshop manual.
Tightening Torque: 88 - 119 Nm (65 - 87 ft-lbs)
10.
Write "Loctite", the date and this bulletin number on the transfer case yoke with a paint pen.
NOTE:
This information will inform future technicians that a 3-jaw puller is required to remove this yoke if future repair is necessary.
11.
Verify repair.
PARTS INFORMATION - Obtain locally
Mazda dealers in the U.S. - Call 1-800-338-9000, 8am to 5pm (EST) or fax 1-800-548-7369
Mazda dealers in Canada - Call 1-905-890-6511, or fax 1-905-890-6522
Ask for Loctite Quick Metal Retaining Compound Program PN 66010
WARRANTY INFORMATION
(Applies To Verified Customer Complaints On Vehicles Covered Under Normal Warranty. Refer To The SRT Microfiche For Warranty Term
Information.)
Disclaimer