mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

A/T - O/D OFF Lamp Flashing, MIL ON DTCs P0741/P1740|Page 2957 > < Shift Solenoid, A/T|Service and Repair|Page 2948
Page 1
background image

Torque Converter Clutch Solenoid: All Technical Service Bulletins
A/T - O/D OFF Lamp Flashing, MIL ON DTCs P0741/P1740

Bulletin No.: 003/99R
Issued: 05/28/99
Revised: 06/17/99

Section
05

Applicable Model/s 
1998 B-Series

Subject
O/D OFF INDICATOR (O/D OFF) FLASHING, MIL "ON" DTCS P0741 AND/OR P1740

BULLETIN REVISION NOTE

^

The header SUBJECT of this bulletin has been revised.

APPLICABLE MODEL(S)/VINS
1998 B-Series built from 10/1/97 through 1/31/98.

DESCRIPTION

A flashing overdrive off indicator (O/D OFF) with the Malfunction Indicator Lamp (MIL) "ON" and Diagnostic Trouble

Codes (DTCs) P0741 and/or P1740 may occur. This could be caused by a damaged Torque Converter Clutch (TCC) solenoid. A modified part is
available to resolve this concern.

Customers having this concern should have their vehicle repaired using the following procedure.

REPAIR PROCEDURE

1.

Verify customer concern.

2.

Perform Workshop Manual diagnostic procedures and perform necessary repairs.

If concern is still present, inspect TCC solenoid for the following conditions. Refer to illustration.

^

Lot numbers 769 or 771

A/T - O/D OFF Lamp Flashing, MIL ON DTCs P0741/P1740|Page 2957 > < Shift Solenoid, A/T|Service and Repair|Page 2948