B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
Differential Mount: Service and Repair
FRONT AXLE RETAINER REMOVAL / INSTALLATION
1. Raise the vehicle on a hoist.
2. Remove the bushing through-bolt.
3. Remove the three retainer bracket bolts.
4. Install in reverse order of removal.
Tightening torque: Retainer Bracket Bolts 64-91 Nm (6.5-9.3 kgf-m, 47-67 ft. lbs.)
Tightening torque: Bushing Through Bolt 60-80 Nm (6.1-8.2 kgf-m, 45-59 ft. lbs.)