B3000 TL Cab Plus 4 2WD V6-3.0L OHV (2000)
4. Install the valve cover.
1. Position the valve cover.
2. Tighten the bolts and the stud bolts in the sequence shown.
VALVE COVER-LH REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the upper intake manifold.
3. Disconnect the left hand spark plug wires at the spark plugs.
4. Remove the five bolts and the three stud bolts.
5. Remove the valve cover.
6. Remove the valve cover gasket, if required.