B3000 TL Cab Plus 4 2WD V6-3.0L OHV (2000)
8. Disconnect the crankcase ventilation tube.
9. Remove the two bolts and the six stud bolts and remove the valve cover.
10. Remove the valve cover gasket, if required.
11. Install in the reverse order of removal.
Valve Cover (RH) Installation Note
1. Clean all the mating surfaces.
Note: Do not clean the valve cover gasket with solvent. Damage to the valve cover gasket may occur.
2. Apply a bead of silicone in two places where the cylinder head and cylinder block meet.
3. Install the valve cover gasket.