B4000 A/C Condenser Water Leaks to Passenger Compartment
6.
Inspect the two (2) foam strip seals for proper positing. Refer to the figure shown.
^
There should not be gaps between the casing and the end of the strips.
^
Witness marks should be present along the entire length of the seal.
7.
If necessary, stretch and reposition the strips to eliminate any gaps and provide uniform sealing.
NOTE:
Seal placement is critical, they must be placed along the inner upper edge. If the seal strips require stretching, after positioning, immediately
assemble the evaporator case to prevent the seal strips from shrinking back to the original position.
8.
Remove all moisture, install evaporator core and case assembly.
9.
Verify repair.
WARRANTY INFORMATION
(Applies To Verified Customer Complaints On Vehicles Covered Under Normal Warranty. Refer To The SRT Microfiche For Warranty Term
Information.)
Warranty Type:
A
Symptom Code:
A4
Damage Code:
9G
Part Number Main Cause:
ZZM1-61-J41
Quantity:
0
Operation Number:
YY0256RX
Labor Hours:
2.5 Hrs.
