B Series Truck L4-2209cc DSL (1982)
Front Steering Knuckle: Service and Repair
1.
Raise and support front of vehicle.
2.
Remove front wheels.
3.
Remove front shock absorbers.
4.
Using tool No. 490727575 or equivalent, remove upper ball joint split pin and ball joint from steering knuckle.
5.
Remove upper control arm retaining bolts, nuts, shims and upper control arm from vehicle.
6.
Remove ball joint nuts, bolts and ball joint from upper arm.
7.
Remove stabilizer bar retaining nut, washers, bushings and stabilizer bar from lower arm.
8.
Position a suitable jack under lower arm and raise lower arm slightly to relieve spring pressure.
9.
Using tool No. 490727575 or equivalent, remove lower ball joint split pin, nut and ball joint from steering knuckle.
10.
Lower jack and lower control arm and remove coil spring from vehicle.
11.
Remove lower arm bolts, nuts and lower arm from vehicle.
12.
Remove ball joint from lower arm.
13.
Reverse procedure to install.
