CX-7 FWD L4-2.3L Turbo (2010)
Evaporator Temperature Sensor Assembly Note
1. Assemble the evaporator temperature sensor as shown in the figure.
Adhesive polyurethane (2) Assembly Note
1. Attach the adhesive polyurethane (2) as shown in the figure.
2. After assembling the evaporator pipe as shown in the figure, attach the adhesive polyurethane (2) so that it adheres around the high-pressure side
of the evaporator pipe.
Adhesive polyurethane (4) Assembly Note
1. Attach the adhesive polyurethane (4) so that it adheres around the expansion valve.