Mazdaspeed6 L4-2.3L Turbo (2006)
Console: Removal and Replacement
Center Box Removal/Installation
CENTER BOX REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the center panel unit.
3. Remove the screws.
4. Pull the center box outward, then disengage the tabs.
5. Disconnect the information display connector.
6. Install in the reverse order of removal.
Console Removal/Installation
CONSOLE REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. For MAX vehicle, remove the shift lever knob.
3. Remove the panel No.1 using a tape-wrapped screwdriver.
4. Remove the panel No.2 using a tape-wrapped screwdriver, disconnect the cigarette lighter connector, and remove the front ashtray illumination.
5. Rotate the wiring harness clip installed on the cradle 90° in the direction indicated by the arrow in the figure and pull it out. (with car-navigation
system)
